Siding and gutter replacement in Buffalo Grove, done while the wall is open
We repair and replace vinyl and fiber cement siding on Buffalo Grove houses, and we take down and hang new aluminum gutters and downspouts. When both are worn, we do them in one visit, because the downspouts have to come off the wall before the old siding can.

Where your siding and your gutters touch
On most Buffalo Grove houses the two systems share four spots. Each one decides whether a siding job also moves the gutters, and the other way round. The drawing is the side of a two-story house with a lower roof by the garage.
The top course of siding stops just under the eave. A gutter that leaks at its back soaks that course and the board behind it, which is why stained siding up high often starts as a gutter problem. Our gutter repair page shows the six usual failure points.
Each strap is screwed through a siding panel. Before a wall is re-sided, every downspout on it comes off, and that's the cheapest moment to change its size or position.
Where a lower roof runs into a side wall, a small bent flashing turns water into the gutter instead of behind the siding. It sits under the siding, so it's fitted when that wall is open. The leak it stops is traced on our roof-to-wall flashing repair page.
A downspout that dumps beside the wall splashes the bottom courses. Moving the outlet is part of the gutter job, and our downspout installation page covers sizes and how far water should go.
Should I replace my gutters when I replace my siding?
Only when the gutters are also worn. Look at both from the yard and find your square.
We take out the broken panels and lock matching ones into the courses around them. The gutters stay where they are. The method is on our siding repair page.
If the damaged panels sit under the bad gutter run, we fix the run first, so the new panels don't stain the same way.
The downspouts come off, the siding goes on, and the same gutters and downspouts go back up on fresh straps.
The old gutters come down once and new ones go up on the finished wall. You pay for one take-down, not two.
The order we work in on a Buffalo Grove wall
Siding goes on from the bottom up and gutters go on last, so nothing new gets pulled off again. A typical single-family house is re-sided in three to five working days.
Straps unscrewed, pipes kept if they go back up.
Only on the walls where they are being replaced.
Sheathing and fascia checked by hand. Soft wood is its own priced line.
Wrap on the sheathing, flashing over windows, a kickout where a roof meets the wall.
Vinyl hung loose on its nails so it can move, or fiber cement nailed to its maker's spacing.
Pitched to the outlets, downspouts strapped back through the new panels.
How vinyl is hung so it survives the winters here is shown on our vinyl siding replacement page, and fiber cement on the fiber cement installation page.
How much does siding and gutter replacement cost in Buffalo Grove?
The tape is a worked example built from our published rates, not a quote. Window and door openings aren't taken off the wall area, to keep the sum easy to follow, so a real wall usually comes in lower.
A whole single-family house in vinyl runs $10,000 to $18,000. Fiber cement costs $8 to $14 a square foot instead of $4 to $9.
Your own figure comes in writing after we measure every wall, window, corner and run of gutter. Soft sheathing or fascia found once the old siding is off is priced as its own line.
Our roofs already on Buffalo Grove streets
Our project gallery has 14 entries from Buffalo Grove, all of them roofs. A storm or an age that wore out a roof usually reached the walls and gutters of the same house, so this is where most of our siding and gutter calls in the village start.
Cambridge in Dual Brown, Dual Grey, Driftwood and Redwood, and one Dynasty in Shadow Brown.
Landmark in Pewter and Heather Blend, and one Landmark Pro Max in Max Def Burnt Sienna.
Duration in Shasta White and Desert Rose, and one Oakridge in White.
Photos of each are in the project gallery. For the roof itself, read our roofing page for Buffalo Grove.
Siding and gutters damaged by hail or wind
Buffalo Grove sits across the line of Cook and Lake counties, and storms reach it from every side. Hail dents aluminum gutters and cracks vinyl on the wall facing the storm, and wind lifts panels off their lock.
Photograph each wall and gutter run from the yard before anything is patched, and keep any panel that blew off, since it shows the profile and color. We measure every damaged wall and run and write a code-compliant estimate with the barrier and flashing included.
What Illinois law lets a contractor do on a claim
A roofer in Illinois may not bargain with your insurance company over a claim. That part can go to our partner, the licensed Illinois public adjuster State Adjusting Services, who works for you with the carrier, and we stay on the walls and gutters. Our article on the siding storm damage insurance claim explains how matching is argued.
Who comes to your house
Our own crews, from our base in neighboring Lincolnshire. We're a family business, licensed in Illinois as a roofer under number 104.018671.
from 91 Google reviews
When we answer
Weekdays 7 AM to 7 PM. Saturdays and Sundays 9 AM to 5 PM.
Questions from Buffalo Grove homeowners
Should I replace my gutters when I replace my siding?
Only if the gutters are leaking, sagging or dented too. The downspouts come off the wall for re-siding anyway, so new gutters go up on the finished wall and you pay for one take-down instead of two. Sound gutters simply go back up.
How much does siding and gutter replacement cost in Buffalo Grove?
Vinyl siding runs $4 to $9 a square foot installed, new aluminum gutter $6 to $14 a foot, and taking the old gutter down $1 to $2 a foot. One 30 by 18 foot wall with its gutter and a downspout comes to about $2,490 to $5,620.
Can you repair a few siding panels without touching the gutters?
Yes. When only a handful of panels are cracked or torn, we take them out and lock matching ones into the courses around them. The gutters stay up, unless a leaking run above is what stained or soaked those panels.
Do I need a permit for siding or gutters in Buffalo Grove?
The Village of Buffalo Grove decides which exterior jobs need a permit, so ask its building department before the old siding comes off. Whatever the answer, the new wall gets a weather barrier and flashing under the siding.
Want this looked at?
We inspect for free, document what we find and prepare a code-compliant estimate you can hand to your insurer. Our partner, a licensed public adjuster, State Adjusting Services, can represent you on the claim.
Call (866) 992-2982. Free Inspection